KY-305 White Uniform Emulsions, Cationic Hydroxyl Silicone Emulsion
as Fiber-glass Water-proofing Agent
Hydroxyl Silicone oil emulsion as fabric finishing agent, mould
releasing agent and fiber-glass water-proofing agent
KY-305 Cationic dimethyl hydroxyl silicone emulsion
A, product description
1, chemical name: cationic hydroxyl polydimethylsiloxane emulsion
2, product structured:
B, nature and purpose
This product is one uniform polydimethyl siloxane emulsion ending
with the hydroxyl, hydroxyl is very active and very easy for
forming a flexible film in low temperature because of
polycondensate, the methyl is water condensating group, which can
play a good waterproof effection mixted used with methyl of
hydrogen silicone emulsion.
For fabric finishing agent: this product is a high-quality fabric
finishing agent, used to deal with the chemical fiber, silk, wool,
linen fabric and so on , Which can also soft ,smoot and prevent
pilling of the fabric, increase fabric washes wearable and gender.
make feeling perfect.
For sewing thread: Can also be used to deal with sewing thread, the
sewing thread will not be broken under high-speed sewing.
For mould releasing agent: this product can also be used in rubber
and ceramics mould releasing agent,
For fiber-glass water-proofing agent.
C, technical index
1, appearance: white uniform emulsions, light blue .
2, PH value: 6 to 7
3, oil content: 28 + 2%
4, particle size: ≤ 2u
5, molecular weight: 3 ~ 6 million
6, centrifugal stability: (3000r/min x 15min) : don't drift oil
7, thermal stability: (120 ℃ x 0.5 h) : don't drift oil,
8, the extracting oil viscosity: (mpa. S) : 3.0 x 10,000
1, Must pay attention to avoid mixing anion material when using,
otherwise the emulsion will be condensed and which will influence
2, emulsion effective storage period is half an year, if more than
storage period, pls re-check the goods according to the specified
project standards, if result can reach the quality requirement,
then which can be still used.
E, packing and shipping
1, the product should be stored in a clean, airtight plastic
2, should be stored in dry and ventilated, shady and cool place,
avoid direct sunlight, the temperature in storeroom can’t be too
high,while pls be sure to more than - 5 ℃ to preventing frozen.
3, the products to be shipped according to the non-dangerous goods.